Wednesday, 2 May 2018
Tuesday, 19 September 2017
Sash Window Care and Operation Guide
Sash Window Care and Operation Guide
The sash window or vertical sliding window was the most
ingenious product of the seventeenth-century and has found
acceptance by over half the western world.
Sash windows have influenced the architecture of buildings for
more than two centuries and the whole design of buildings was
constructed around the grace and dignity of the sash window.
The traditional appearance and the operational effectiveness
including some refinements have been incorporated into
today’s modern PVC-U sash windows.
Unlocking the window -
If you have key locks, insert the key into the locking cam catch and turn to unlock.
Turn the cam catch anti-clockwise through 180 degrees to open.
Limit Stops - Some windows may have limit stops fitted on the top sash. This opening restrictor allows for the top or bottom sash to be opened to a set position of 100mm. This needs to be pressed in or locked in position using the black nylon key provided to allow the sash to travel past it.
You will now be able to slide the sashes up and down freely.
Ventilation - Vents can be fitted to the top rail of top sash. If fitted slide the cover sideways to open the vent to the desirable position. Care should be taken that the bottom sash does not contact the vent as this may cause damage to the internal vent cover. If you have K3 two stage keeps fitted you can lock the window closed or slightly open for ventilation.
All about cleaning your windows & operating the tilt facility (if fitted)
The most significant difference between the modern PVC-U sash window and its traditional window equivalent is the tilt facility that enables safe cleaning from the inside.
PVC-U should be cleaned at periodic intervals to maintain the original pristine appearance. The frequency depends on the geographical location and the local environment but as a general rule the frame should be cleaned whenever the glass is being done.
1)Slide the bottom sash clear of the cill up-stand. This releases the interlocks that prevent drafts from between the top and bottom sash.
2)Slide the tilt knobs towards the centre of the sash (tilt knobs are located on the top of the bottom sash at either side).
3)Gently pull towards you until the tilt rest arms on the side of the sash engage and take the weight of the sash.
- The top sash can be operated in the same manner when the bottom sash has already been opened. 4)Wipe over the plastic profiles with a damp cloth, working from the top of the top sash to the bottom of the bottom sash.
5)Clean the glass using water based glass cleaner or soapy water. NB: When cleaning a window it can be difficult to clean the external travel stops. Should you be tempted to remove for cleaning, do not slide the sash as the balances can be overstretched and thus permanently damaged. After closing the sash, give a slight pull towards you to ensure the sash has latched into the frame properly.
• Wipe the white rubber seal on the bottom of the bottom sash to maintain a good white finish.
• Ensure the drainage holes located on the bottom of each sash are clear to allow for drainage.
• Clean the grey brush pile to ensure good seal against drafts.
• Use silicone spray or a beeswax polish to lubricate the sliding components. If the window starts to stick or squeak, NEVER use oil based products on your sash windows.
• Clean the outside pane of the top sash first. When complete, return the sash to a vertical position and then clean the inside pane.
Apply the same procedure to the bottom sash. After cleaning it is absolutely essential to check all tilt latches have re-engaged. Do not forget to reset any Limit Stops after cleaning
What chemicals to use to clean the PVC-U?
The best method of cleaning is to use a clean cloth and a solution detergent such as Flash or Fairy liquid diluted to the normal concentration for floor cleaning or washing up.
If the surfaces are excessively dirty or unsightly and stains remain, then a mild nonscouring cream such as Cif can be applied.
Most suitable window cleaning detergents are probably already in use in the majority of households.
NB: Avoid at all times solvent based cleaners and abrasive materials because of scratching and especially the use of steel wool pads as these may cause permanent scratches. If you follow these instructions your windows will look good and operate as well as the day they were installed.
The sash window or vertical sliding window was the most
ingenious product of the seventeenth-century and has found
acceptance by over half the western world.
Sash windows have influenced the architecture of buildings for
more than two centuries and the whole design of buildings was
constructed around the grace and dignity of the sash window.
The traditional appearance and the operational effectiveness
including some refinements have been incorporated into
today’s modern PVC-U sash windows.
Unlocking the window -
If you have key locks, insert the key into the locking cam catch and turn to unlock.
Turn the cam catch anti-clockwise through 180 degrees to open.
Limit Stops - Some windows may have limit stops fitted on the top sash. This opening restrictor allows for the top or bottom sash to be opened to a set position of 100mm. This needs to be pressed in or locked in position using the black nylon key provided to allow the sash to travel past it.
You will now be able to slide the sashes up and down freely.
Ventilation - Vents can be fitted to the top rail of top sash. If fitted slide the cover sideways to open the vent to the desirable position. Care should be taken that the bottom sash does not contact the vent as this may cause damage to the internal vent cover. If you have K3 two stage keeps fitted you can lock the window closed or slightly open for ventilation.
All about cleaning your windows & operating the tilt facility (if fitted)
The most significant difference between the modern PVC-U sash window and its traditional window equivalent is the tilt facility that enables safe cleaning from the inside.
PVC-U should be cleaned at periodic intervals to maintain the original pristine appearance. The frequency depends on the geographical location and the local environment but as a general rule the frame should be cleaned whenever the glass is being done.
1)Slide the bottom sash clear of the cill up-stand. This releases the interlocks that prevent drafts from between the top and bottom sash.
2)Slide the tilt knobs towards the centre of the sash (tilt knobs are located on the top of the bottom sash at either side).
3)Gently pull towards you until the tilt rest arms on the side of the sash engage and take the weight of the sash.
- The top sash can be operated in the same manner when the bottom sash has already been opened. 4)Wipe over the plastic profiles with a damp cloth, working from the top of the top sash to the bottom of the bottom sash.
5)Clean the glass using water based glass cleaner or soapy water. NB: When cleaning a window it can be difficult to clean the external travel stops. Should you be tempted to remove for cleaning, do not slide the sash as the balances can be overstretched and thus permanently damaged. After closing the sash, give a slight pull towards you to ensure the sash has latched into the frame properly.
• Wipe the white rubber seal on the bottom of the bottom sash to maintain a good white finish.
• Ensure the drainage holes located on the bottom of each sash are clear to allow for drainage.
• Clean the grey brush pile to ensure good seal against drafts.
• Use silicone spray or a beeswax polish to lubricate the sliding components. If the window starts to stick or squeak, NEVER use oil based products on your sash windows.
• Clean the outside pane of the top sash first. When complete, return the sash to a vertical position and then clean the inside pane.
Apply the same procedure to the bottom sash. After cleaning it is absolutely essential to check all tilt latches have re-engaged. Do not forget to reset any Limit Stops after cleaning
What chemicals to use to clean the PVC-U?
The best method of cleaning is to use a clean cloth and a solution detergent such as Flash or Fairy liquid diluted to the normal concentration for floor cleaning or washing up.
If the surfaces are excessively dirty or unsightly and stains remain, then a mild nonscouring cream such as Cif can be applied.
Most suitable window cleaning detergents are probably already in use in the majority of households.
NB: Avoid at all times solvent based cleaners and abrasive materials because of scratching and especially the use of steel wool pads as these may cause permanent scratches. If you follow these instructions your windows will look good and operate as well as the day they were installed.
C & L Windows and Conservatories Ltd
65, Seymour Road
Gloucester
Gloucestershire
GL1 5PT
01452 526028
65, Seymour Road
Gloucester
Gloucestershire
GL1 5PT
01452 526028
www.candlwindows.co.uk
Thursday, 10 August 2017
Ultra380 Conservatory Roof
UltraRoof380’s lightweight tiled roofing system gives you the most advanced replacement roof available on the market today.
UltraRoof380 overcomes the twin issues of your old conservatory being too hot in summer and too cold in winter. Moreover, it creates a beautiful vaulted plastered ceiling inside - and on the outside a stunning lightweight tiled finish.
For those who want a solid roof but still want to retain an element of light within the room, the clever configurable technology in the UltraRoof380 allows the installation of multiple glass panels or Velux Windows – this can help project light into the adjacent room and give you a truly bespoke design.
Extremely thermally efficient due to its advanced design, UltraRoof380 is fully compliant with Building Regulations and has jhai system approval, giving you peace of mind from the outset of your replacement roof project.
.JPG)
At the ridge and hips of your roof you can choose between a modern aluminium capping or a more traditional tile roof capping, once again giving you a choice of design for your roof.
The external fascia boards are available in different colour choices to match or contrast your existing window frames: White, Black, Rosewood, Oak.
Depending on your preference, full glazed panels or Velux windows can be inserted into the roof to enable natural light to flood into the room. High performance glazing can be used to further enhance the experience of your new room. This glass can help reduce glare from the sun and control the amount of heat that you allow into the space.
Choose from Three Tile Colours:
Internally the UltraRoof380 is second to none. Around the perimeter of the ceiling sits an internal pelmet which can be used to insert spotlights or speakers and at the apex of the roof you can choose to add a fl at panel enabling you to insert down lights or hang pendant lights for main or mood lighting.
UltraRoof380 has a proven pedigree and will provide comfort and peace of mind for many years to come. The complete roof is pre manufactured to ensure consistent quality on site and speedy installation with minimal waste and minimal disruption to your home compared to other tiled roof solutions.
C & L Windows and Conservatories Ltd
65, Seymour Road
Gloucester
Gloucestershire
GL1 5PT
01452 526028
65, Seymour Road
Gloucester
Gloucestershire
GL1 5PT
01452 526028
www.candlwindows.co.uk
Thursday, 8 June 2017
Wednesday, 24 May 2017
Heritage Sculptured Sash
Heritage Sculptured Sash
- Smooth contours
- Welded transom and mullion joints
- Unique optional horn sash
- Exquisite Georgian bar option
- Traditional ironmongery options
- High energy rating and weather performance
- Enhanced security PAS 24 Approved
- Double or triple glazing available
- Low Maintenance PVC-U frames
- Available in a range of hand-picked Heritage woodgrain finishes
Sculptured Sash windows feature outward opening sashes which stand proud of the face of the window frame and are the more typical style used in homes you see today. For that period property look, Sculptured Sash windows can also feature a dummy sash, this simple but effective upgrade to achieve “equal sight-lines” can really enhance the beauty of your home.
This range is ideal for period properties and those who want to add character and enhance the appearance of their homes. The stunning and individual aesthetic of this range makes it a market leader.
Premium Woodgrain Foils in
|
Super Efficient
Compared with aluminium or wood, PVC-U windows are low maintenance, have better insulation values and are able to reduce energy and heating costs. | |
Your Ideal Home
The Deceuninck Heritage Sculptured Sash sits perfectly in any property, whether it be a modern town house, a quaint country cottage or even a period home. | |
Sound-Proof
Glazing options to maximise energy efficiency and/or sound proofing. | |
Safe and Secure
For total peace of mind, our Heritage Sculptured windows come with multi-point locking as standard. |
Tuesday, 23 May 2017
Friday, 28 April 2017
Solidor Front Doors
Welcome home! Your Front door is the heartbeat of your home – it gets the most use, protects you from the elements and it keeps you safe. Whether you’re planning a whole house renovation or a simple lick of paint, the impact of a new front door can transform any property. That’s why thousands of home lovers across the country have chosen a Solidor to enhance and protect their home. With Solidor you can find a front door that sets the style for your property and gives you essential protection from the outside world. Whether your style is traditional or contemporary, maybe you’re looking for a standard size or perhaps you’d like a door which is bespoke. Solidor has everything you need!
The most secure composite door available on the market
• 100% recycled thermally efficient reinforcing system
• 5 chamber lead free thermally efficient profile
• Extensive recycling programme
• Door can be recycled at the end of its useful life, not destined for land fill
• Fully manufactured in the UK to minimise our carbon footprint
• Lead free door skins and edge banding
SOLIDOR CONSTRUCTION
Lead free, 5 chamber profile with 100% recycled reinforcing
Thermally efficient Solid Timber Core
Robust through colour thermo plastic skins
Realistic wood grain effect or smooth finish
Optional integral mobility access aluminium threshold
A TYPICAL FOAM FILLED CONSTRUCTION
Only a small section of the door is actually solid
Thermally good, but foam filled so not solid, nor secure
Gel coated GRP may be strong but it scratches very easily and can be cut through
Most other doors have frames containing lead stabilizers. The | frames are only 3 chambers thick and use valuable steel or aluminium reinforcements
Our Green Credentials
Timber can make a significant contribution to sustainable construction 1. Wood is naturally renewable 2. It is independently certified to be sourced from sustainably managed forests 3. Doors with timber cores save energy 4. They last longer 5. They add to our quality of life 6. They have fewer environment
The most secure composite door available on the market
• 100% recycled thermally efficient reinforcing system
• 5 chamber lead free thermally efficient profile
• Extensive recycling programme
• Door can be recycled at the end of its useful life, not destined for land fill
• Fully manufactured in the UK to minimise our carbon footprint
• Lead free door skins and edge banding
SOLIDOR CONSTRUCTION
Lead free, 5 chamber profile with 100% recycled reinforcing
Thermally efficient Solid Timber Core
Robust through colour thermo plastic skins
Realistic wood grain effect or smooth finish
Optional integral mobility access aluminium threshold
A TYPICAL FOAM FILLED CONSTRUCTION
Only a small section of the door is actually solid
Thermally good, but foam filled so not solid, nor secure
Gel coated GRP may be strong but it scratches very easily and can be cut through
Most other doors have frames containing lead stabilizers. The | frames are only 3 chambers thick and use valuable steel or aluminium reinforcements
Our Green Credentials
Timber can make a significant contribution to sustainable construction 1. Wood is naturally renewable 2. It is independently certified to be sourced from sustainably managed forests 3. Doors with timber cores save energy 4. They last longer 5. They add to our quality of life 6. They have fewer environment
C & L Windows and Conservatories Ltd
65, Seymour Road,
Gloucester
Gloucestershire
GL1 5PT
(01452) 526028
www.candlwindows.co.uk
Subscribe to:
Posts (Atom)