Secondary glazing

Approximately 10% of the total heat loss from a typical house is through the windows. A further 15% of heat loss is due to draughts. Secondary glazing can be a cost effective way of reducing this heat loss and making your home more comfortable.

For some householders replacing old single-glazed windows with modern double-glazing is not an option. This may due to the cost involved, or because the house is listed or in a conservation area where original features like sash windows have to be retained. 

However it is still possible to cut out the draughts and reduce heat loss through windows using various forms of secondary glazing. Some can be bought from your local hardware store and fitted yourself; others are more specialist. Some of the secondary-glazing options listed below are not allowed in listed buildings, so check first.

Transparent film secondary glazing

The simplest and cheapest form of secondary glazing is thin transparent plastic film which you install yourself using strips of double-sided sticky tape around the frame of the window. The material looks like ‘cling-film’, but if fitted properly it is wrinkle-free and almost invisible. To install, apply the tape to the frame of the window, cut the film to size and attach it carefully to the tape until it creates a seal. Then carefully shrink the film with hot air from a hairdryer until it pulls taught, and trim any excess film from around the edges.

Temporary secondary glazing

Next up, in terms of expense, complexity and permanence are the systems in which a sheet of rigid and transparent material like clear acrylic plastic or clear polystyrene is fitted to the window frame, in such a way that it can be put up or taken down as the season requires. Some systems use magnet strips to attach the secondary glazing to the frame, others a Velcro-like material. A particularly popular method is ‘clip and stick’ where uPVC edging is used to clip the panel in place over the window frame.

This type of secondary glazing also helps reduce noise.

Semi-permanent secondary glazing

Some of the more expensive types of secondary glazing are semi-permanent and are fixed either by screwing them into place or using a strong adhesive or sealant. They can be made of heavy materials like glass. On wider windows they can slide open on tracks to allow the windows to open as normal. This type are not generally suitable for DIY.

Sash windows are notorious for letting in cold air. You can get clear, light-weight acrylic panels to fit over the glazed frames, but these don’t cover the many gaps on the sides, top and bottom that make sash frames particularly draughty.

C & L Windows and Conservatories LTD
65, Seymour Road
Gloucester
Gloucestershire
GL1 5PT

www.candlwindows.co.uk

01452 526028